Specification
Mobile Lighting Tower is mounted on a trailer powered by Kubota or Perkins engine. It is used in outdoor lighting applied in various fields, like airport, docks, mining sites, stadiums, railway, construction sites, emergency recovery sites etc.
Item | Specification |
---|---|
Trailer | |
Maximum height | 9m |
Mast Rotation | 350° |
Mast Lifting & Extension | Manual winch |
Number of Mast Section | 4 |
Light up-down turning | Manual operation |
Trailer Suspension System | Rubber Torsion axle(Al-ko) |
Chassis Structure | Single Axle |
Tow Hitch | 50mm Ball-2000Kg |
Stabilizing Legs | 4*Manual |
Tire Rim Size | 185/70R13 |
Brakes | Cable drum down |
Output Socket | 2PCS(110V,16A) & 1X12V DC |
Maximum wind speed | 80 km/h |
Engine Characteristics | |
Engine brand/Model | Kubota - D1105-BG |
Engine type | Water cooled, 4-strok |
No. of Cylinder | 3 |
Engine rated power at 50Hz | 11.5Kw |
Revolution(RPM) at 50Hz | 1500 |
Fuel tank capacity | 100 liters, DIESEL |
Fuel Tank Operating Hours | 50Hrs at Full load |
Emissions | EU Stage II |
Sound pressure level at 7m | 72 dBA |
Alternator | |
Alternator | Stamford PI044D |
Output(Primary) | 7.5kW(9Kva) |
Power factor | 0.8 |
Exciter system | Brushless with 4-pole stator |
Voltage adjustment | AVR (Automatic Voltage Regulation) |
Voltage/Frequency | 220V/50Hz |
Phase number & Frequency | Three Phase |
Ingress Protection Rating | IP54 |
Insulation class (stator) | Class H |
Insulation class (rotor) | Class H per NEMA MG1-1.65 and BS 5000 |
Dimensions and weight(assembled) | |
Genset size | 1900mm*1600mm*1600 mm |
Genset gross weight | 798KGS |
Loading Quantity | 16units in 1*20GP, 32units in 1*40HQ |
Lighting characteristics | |
Lamp type | HID Double ended, Metal halide Floodlight ,1000W |
Lamp quantity | 4x1000W |
Lighting capacity (max.) | 110.000 lumen/bulb |
Protection class | IP65 |
Operational environment | |
Minimal guaranteed temperature of start-up /ignition | - 10°C |
Maximum humidity | 85% |
General Feature | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Was founded in 2006 by Mr. ZhaoHong Rao. We specialize in developing and producing diesel engines, diesel gen sets and pumps.
We provide power solutions for a multitude of applications, whether they are for residential, commercial, industrial, Telecom, hospitality, agricultural or recreational uses. We ensure our clients requirements are met and fulfilled at all times through our over 10 years experience.
By integrating the supply chain resources in China, we are willing to share theLow-costof Made in China and theHigh-qualityof Create in China with all customers around the world.
Our goal is to help customers reduce costs and increase competitiveness continuously.